# SILCARP Physical Proof-of-Concept (POC) Mule Build Guide
**Location:** Prague / Smiřice Workshop  
**Document ID:** `SILCARP-MULE-BUILD-001`  
**License:** CERN-OHL-S v2 / CC BY-SA 4.0  
**Target:** Phase 1 Rolling Chassis & Seating Ergonomics Mule  

---

## 1. Build Sequence Overview

To minimize financial and fabrication risk, SILCARP development follows a strict 3-stage hardware pipeline:

1. **Stage 0: 1:1 Wooden Ergonomic Seating Buck (Weekend 1)**
   - Fabricated from 18 mm OSB and $50 \times 100\text{ mm}$ (2x4) spruce construction lumber.
   - Purpose: Physically validate the $820\text{ mm}$ front door ingress aperture, pedal reach, hip-point (H-point), rigid steering column clearance, and outward visibility before cutting steel.
2. **Stage 1: Steel Rolling Spaceframe Mule (Weeks 2–4)**
   - Welded S235 tubular chassis rolling on Fiat 500 suspension uprights, 4×100 steel wheels, and manual steering rack.
   - Towed or pushed to test steering lock, turning circle ($< 7.5\text{ m}$), suspension travel, and braking feel.
3. **Stage 2: Powertrain & Low-Speed Traction Mule (Weeks 5–6)**
   - Integration of QS138 PMSM, Trampa VESC 100/250, Service Spine bay, and initial 72V test battery (ToolPack or salvage MEB module).

---

## 2. Stage 0: 1:1 Wooden Ergonomic Buck Cut List

Constructed in an afternoon with a circular saw, jigsaw, and cordless impact driver ($4.5 \times 50\text{ mm}$ Torx wood screws).

```
          Wooden Ergonomic Buck Frame Layout (Side Profile)
       =======================================================
       
            [A-Pillar / Hinge Post] 
                  /|
                 / |  <-- [ Front Door Opening: 820 mm Wide ]
                /  |
               /   |       +----------+ [Roof Rail: 1,480 mm Height]
              /    |       |          |
             /     +-------+          +------+
            /                                |
           /  [Steering Pedestal]            |  [Rear Bulkhead]
          /        [320mm Whl]               |
         /            \   [Bench Seat]       |
        /      _       \      ____           |
       +------|_|-------O----|____|----------+
       [Bumper] [Pedals]      [Floorpan]     [Rear Subframe]
       =======================================================
               <------- Wheelbase: 1,680 mm ------->
```

### Lumber & Sheet Material List
| Item | Material | Dimensions (mm) | Qty | Purpose | Sourcing (Czech Republic) |
| :--- | :--- | :--- | :--- | :--- | :--- |
| **B1** | OSB 3 Superfinish | $2500 \times 1250 \times 18\text{ mm}$ | 3 sheets | Floorpan, side bulkheads, seat base | Hornbach / DEK (~480 CZK/sheet) |
| **L1** | Spruce KVH timber | $60 \times 100 \times 3000\text{ mm}$ | 4 beams | Base ladder perimeter rails | Hornbach / Stavebniny (~220 CZK/ea) |
| **L2** | Spruce framing batten | $40 \times 60 \times 3000\text{ mm}$ | 6 battens| Roof hoops, door opening perimeter | Hornbach (~95 CZK/ea) |
| **F1** | Wood screws | $4.5 \times 50\text{ mm}$ TX20 | 250 pcs | Assembly fasteners | Any hardware store (~120 CZK) |
| **F2** | Heavy corner brackets | $80 \times 80 \times 20\text{ mm}$ steel | 16 pcs | Frame corner joints | Hornbach (~25 CZK/ea) |

### Key Ergonomic Checkpoints to Validate on the Buck
- [ ] **Steering Column Clearance:** Step through the front door opening with right foot; verify clearance between knee and rigid steering column is $> 120\text{ mm}$.
- [ ] **H-Point Height:** Seat base cushion at $380\text{ mm}$ above floorpan; eye level should clear the top windshield rail by $80\text{–}100\text{ mm}$.
- [ ] **Door Grab Strap Reach:** Sitting fully buckled in the seat, driver must easily reach the door pull strap at an 85° swing angle without unbuckling the 3-point seatbelt.

---

## 3. Stage 1: Steel Rolling Spaceframe Tube Cut List

Fabricated from standard structural mild steel tubing (S235JR / S275JR). Tubing is cut using an angle grinder with $1.0\text{ mm}$ ultra-thin cutting discs and coped using 3D printed clamp-on magnetic guide jigs.

```
+=============================================================================+
| SILCARP SPACEFRAME TUBE BILL OF MATERIALS (BOM)                             |
+=============================================================================+
| Section Type              | Spec / OD x Wall | Total Length | Cut Pieces    |
+---------------------------+------------------+--------------+---------------+
| Main Floor Ladder Rails   | 35 x 35 x 2.0 mm | 12.0 meters  | 2x 2,450 mm   |
| (Square RHS)              | S235JR           |              | 4x 1,180 mm   |
+---------------------------+------------------+--------------+---------------+
| Main Safety Roll Hoops    | 32 x 2.0 mm OD   | 14.5 meters  | 2x 4,200 mm   |
| (Round Seamless Tube)     | S235 / E235      |              | (B-pillar ring)
+---------------------------+------------------+--------------+---------------+
| Front A-Pillars & Door    | 32 x 2.0 mm OD   | 9.0 meters   | 2x 1,450 mm   |
| Ring Frame                | S235             |              | 2x 1,150 mm   |
+---------------------------+------------------+--------------+---------------+
| Diagonal Triangulation    | 25 x 25 x 1.5 mm | 18.0 meters  | 14x diagonals |
| Side Sills & Bulkheads    | S235JR           |              | (~850 mm ea)  |
+---------------------------+------------------+--------------+---------------+
| Suspension Mounting Tabs  | 4.0 mm Sheet     | 0.5 m² plate | 16x A-arm tabs|
| (Double-Shear Bungs)      | S355MC           |              | (Laser cut)   |
+=============================================================================+
```

*Total Steel Raw Material Cost:* ~6,800 CZK (sourced directly from Ferona Prague or Kondor).

---

## 4. Pre-Engineered Running Gear & Salvage Sourcing Table

All chassis wear components are standard European catalog parts available within 24 hours:

| Subsystem | Source Component | Donor Vehicle | Part Number / OEM | Est. Price (New/Surplus) | Sourcing Link |
| :--- | :--- | :--- | :--- | :--- | :--- |
| **Front Uprights & Hubs** | Wheel Hub & Bearing (4×100) | VW Golf III / Polo 6N | SKF `VKBA 3596` | ~680 CZK / side | Autodiskont / Autokelly |
| **Front Brake Calipers** | Floating 1-Piston Caliper | Fiat 500 / Panda (169) | TRW `BHN317` / `BHN318` | ~1,150 CZK / side | Autodoc / Bazoš |
| **Front Brake Discs** | Vented Disc $\varnothing 240\times 20\text{ mm}$ (`4×100`, `57.1 mm`) | VW Lupo / Polo 6N | Brembo `08.4177.10` | ~520 CZK / disc | Autodoc |
| **Steering Rack** | Manual Center-Takeoff Rack | Fiat Seicento / Cinquecento | Spidan `52140` / TRW `JRM124` | ~1,850 CZK | Allegro / Bazoš |
| **Steering Column & Shaft** | Non-Power Collapsible Column | Fiat Punto II / Seicento | OEM `46548773` | ~800 CZK (used) | Vrakoviště / Bazoš |
| **Front Coilover Springs** | Adjustable Dampers ($280\text{ mm}$) | Universal Buggy / Quad | 250 lbs/in spring | ~1,600 CZK / pair | eBay / WilTec |
| **Rear Axle Hub Assembly** | 4×100 Rear Hub & Bearing (`57.1 mm` bore) | VW Golf III / Polo 6N | SKF `VKBA 3596` | ~680 CZK / side | Autodoc |
| **Wheels & Tires** | $14\times 5.5\text{J}$ 4×100 ET35 Steelies | VW / Škoda Citigo | 155/65 R14 All-Season | ~3,200 CZK (set of 4)| Bazoš / Pneunet |

---

## 5. Prague / Smiřice Workshop Tool & Equipment Checklist

To build the Stage 1 mule, the workshop must have:

### Essential Fabrication Tools
- [x] **MIG/MAG Welder:** 180A–200A inverter welder (e.g. Omicron GAMA / Kuhtreiber / Jasic), running $0.8\text{ mm}$ ER70S-6 wire with $82\%\text{ Ar} / 18\%\text{ CO}_2$ shielding gas.
- [x] **Angle Grinder ($125\text{ mm}$):** Fitted with $1.0\text{ mm}$ steel slitting discs and flap wheels (P40, P80).
- [x] **Tube Notching Aids:** 3D printed PETG coping sleeves (models generated via `TubeNotch` STL generator) wrapped around tubes to guide angle grinder cut lines with $< 0.5\text{ mm}$ joint gaps.
- [x] **Welding Clamping:** 4x magnetic 90° arrow clamps, 6x heavy C-clamps, 2x locking chain clamps for round tubes.
- [x] **Drill Press or Cordless Drill:** With cobalt HSS drill bits ($3.2\text{ mm}$ to $12\text{ mm}$) and step drill bit ($4\text{–}20\text{ mm}$).
- [x] **Digital Angle Gauge:** Magnetic digital inclinometer (0.1° accuracy) for checking caster (3.5°), camber ($-0.5^\circ$), and kingpin inclination (9.0°).

---

## 6. Execution Milestones (The 6-Week Action Plan)

- **Week 1:** Build Stage 0 Wooden Ergonomic Buck; complete seat and door egress checks with real humans.
- **Week 2:** Procure steel tubes from Ferona; print 3D cutting jigs; cut and cope all ladder and B-pillar hoop tubes.
- **Week 3:** Tack-weld main ladder floorpan on leveled workshop floor; check diagonal squareness ($\Delta < 1.5\text{ mm}$).
- **Week 4:** Fit Fiat 500 uprights and steering rack; complete full MIG welding of spaceframe nodes; bolt on wheels for rolling mule test.
- **Week 5:** Mount central Service Spine bay, dual brake master cylinders, and handbrake cables. Complete brake pressure bleeding.
- **Week 6:** Install QS138 motor and VESC controller; perform first low-speed 10 km/h yard drive under ToolPack battery power.
