# SILCARP All-Weather HVAC & Powertrain Thermal Management System
**Document ID:** `SILCARP-MECH-HVAC-001`  
**License:** CERN-OHL-S v2 / CC BY-SA 4.0  
**Regulatory Anchor:** EU Regulation 3/2014 Annex VI (Defrosting & Demisting)  
**Status:** Approved Engineering Specification  

---

## 1. Executive Summary & Micro-EV Thermal Challenges

Micro-electric vehicles (L6e/L7e) typically suffer from two severe thermal pitfalls:
1. **Winter Fogging & Freezing:** A sealed 2-seat cabin has a tiny internal air volume ($\sim 1.8\text{ m}^3$). Two human occupants exhale $\sim 80\text{–}120\text{ g/h}$ of water vapor, causing immediate severe windshield condensation and frost when ambient temperature is $< 10^\circ\text{C}$. Without an engineered demisting system, driving becomes illegal and dangerous within 3 minutes.
2. **Summer Greenhouse Overheating:** The large, forward-raked Isetta-style front windshield acts as a massive solar collector, easily generating $> 800\text{ W}$ of radiant heat load.

SILCARP solves both challenges with an **open, modular, low-energy thermal architecture**:
- **Winter:** $1.2\text{ kW}$ 72V PTC ceramic core + high-velocity defrost nozzles + heated glass elements.
- **Summer:** Passive flow-through ventilation with rear one-way pressure relief flaps + folding canvas ragtop + optional 72V micro-scroll AC.
- **Powertrain Cooling:** Independent closed liquid cooling loop for the Trampa VESC inverter with a 12V auxiliary radiator.

---

## 2. Cabin HVAC Architecture & Airflow Schematic

```
                                [ Fresh Air Intake (Cowl) ]
                                             |
                                             v
                              +------------------------------+
                              | High-Efficiency Cabin Filter |
                              +--------------+---------------+
                                             |
                                             v
                              +------------------------------+
                              | SPAL 12V Centrifugal Blower  |
                              | (3-Speed: 60/120/180 m³/h)   |
                              +--------------+---------------+
                                             |
                                             v
                              +------------------------------+
                              | 72V 1.2 kW PTC Ceramic Core  |
                              | (Direct High-Voltage Drive)  |
                              +--------------+---------------+
                                             |
                         +-------------------+-------------------+
                         |                                       |
                         v                                       v
        +--------------------------------+      +--------------------------------+
        | Windshield Defrost Nozzle Bar  |      | Footwell Warming Outlets       |
        | (High-Velocity Slot Diffusers) |      | (Dual Driver/Passenger Vents)  |
        +--------------------------------+      +--------------------------------+
                         \                                       /
                          +------------------+------------------+
                                             |
                                             v
                              [ Cabin Air Volume (~1.8 m³) ]
                                             |
                                             v
                              +------------------------------+
                              | Rear C-Pillar One-Way Flaps  |
                              | (VW OEM 1K0 819 909 Vents)   |
                              +--------------+---------------+
                                             |
                                             v
                                  [ Low-Pressure Wake Exit ]
```

---

## 3. Winter Windshield Demisting & Heating (72V PTC System)

### 3.1 72V High-Voltage PTC Ceramic Core
- **Technology:** Self-regulating Positive Temperature Coefficient (PTC) ceramic heating elements. PTC ceramics are intrinsically safe: as core temperature approaches $140^\circ\text{C}$, resistance spikes exponentially, preventing thermal runaway even if blower airflow stops completely.
- **Operating Voltage:** 60V–88V DC (direct connection to 72V traction bus).
- **Power Rating:** $1,200\text{ W}$ nominal at 72V (current draw: $\sim 16.6\text{ A}$).
- **Switching & Control:** Driven via a high-voltage automotive Solid State Relay (SSR) (Crydom / Sensata DC60D20 or Opto22) commanded by the ZombieVerter VCU.
- **Warm-Up Time:** Produces warm discharge air ($> 45^\circ\text{C}$) within 15 seconds of key-on.

### 3.2 Windshield Defrost Nozzle Geometry
- **Ducting:** 3D-printed PETG / ABS low-profile plenum spanning the base of the front windshield ($760\text{ mm}$ width).
- **Nozzle Velocity:** Slot width $6.5\text{ mm}$ tapered to maintain air velocity $\ge 4.5\text{ m/s}$ across the entire inner glass surface.
- **Regulation 3/2014 Compliance:** Clears an $80\%$ windshield vision zone within 10 minutes at $-10^\circ\text{C}$ ambient.

### 3.3 Optional Heated Laminated Windshield (Ultra-Efficient)
- **Tungsten Grid:** Laminated glass with embedded micro-fine vertical tungsten heating wires spaced at $3.0\text{ mm}$.
- **Electrical Load:** 12V / 12A ($144\text{ W}$).
- **Benefit:** Demists frosted glass in 45 seconds using only $12\%$ of the energy consumed by an air blower, preserving battery range in sub-zero winter commuting.

---

## 4. Summer Ventilation & Cabin Thermal Comfort

### 4.1 Passive Flow-Through Ventilation
- **Problem:** Many microcars feel like pressure cookers because air pushed in by the front fan has nowhere to escape.
- **SILCARP Solution:** Dual automotive one-way rubber flapper pressure relief vents (standard VW Golf / Škoda Octavia OEM `1K0 819 909`, ~180 CZK each).
  - Mounted inside the rear C-pillar spaceframe uprights behind the rear quarter panels.
  - Vents permit stale, humid cabin air to exhaust into the aerodynamic low-pressure wake behind the vehicle, while preventing road water or exhaust fumes from back-flowing.
  - Also eliminates acoustic ear-popping pressure spikes when slamming the front refrigerator door.

### 4.2 Open-Air Canvas Sunroof (The Webasto Ragtop)
- **Dimensions:** $850\text{ mm} \times 700\text{ mm}$ central roof aperture.
- **Operation:** Manual two-stage folding canvas roof. Folding it back creates an open convertible breeze that evacuates solar heat buildup instantly.

### 4.3 Optional 72V Micro-Scroll Air Conditioning
For hot climates or sealed urban operation:
- **Compressor:** Compact hermetic 72V DC electric scroll compressor (Benling / Masterflux micro-compressor).
  - Displacement: $18\text{ cc/rev}$.
  - Power: $450\text{–}600\text{ W}$ electric input, yielding $1,800\text{ W}$ ($6,100\text{ BTU}$) cooling capacity.
  - Refrigerant: Eco-friendly R1234yf or R134a ($320\text{ g}$ charge).
- **Condenser:** Underbody-mounted microchannel aluminum heat exchanger with dedicated $12\text{V}$ $80\text{W}$ electric fan.

---

## 5. Powertrain & Inverter Liquid Cooling Loop

The Trampa VESC 100/250 inverter switching 250A continuous requires active heatsinking to prevent thermal throttling ($> 75^\circ\text{C}$):

```
       +------------------------------------------------------+
       |          Trampa VESC 100/250 Water-Cooling Plate     |
       +--------------------------+---------------------------+
                                  |
                                  v Hot Coolant
       +------------------------------------------------------+
       | Bosch 12V Aux Pump (OEM 0 392 020 024 - 15 L/min)    |
       +--------------------------+---------------------------+
                                  |
                                  v
       +------------------------------------------------------+
       | Aluminum Radiator (160x160 mm) + 12V SPAL Puller Fan |
       | Located in low-pressure lower front nose intake       |
       +--------------------------+---------------------------+
                                  |
                                  v Chilled Coolant (50/50 Glycol)
       +------------------------------------------------------+
       | Expansion Reservoir (0.5L with 0.9 bar pressure cap) |
       +------------------------------------------------------+
```

- **Coolant:** Standard automotive G12+ (ethylene glycol / water 50/50 mix).
- **Hose Routing:** Standard $16\text{ mm}$ ($\frac{5}{8}"$) reinforced EPDM automotive heater hose.
- **Thermostatic Fan Trigger:** Blower fan engages via ZombieVerter relay output only when VESC MOSFET temperature exceeds $55^\circ\text{C}$.

---

## 6. Bill of Materials & Off-the-Shelf Sourcing

| Component | Part Description / Model | Supplier / Donor Car | Est. Cost |
| :--- | :--- | :--- | :--- |
| **Blower Fan** | 12V 3-speed centrifugal blower | SPAL `009-A70-74D` / Fiat Panda | ~1,250 CZK |
| **PTC Heater Core** | 72V 1.2 kW insulated ceramic heater | DBK / Industrial EV heater | ~2,100 CZK |
| **Solid State Relay** | 100V DC 40A MOSFET SSR | Sensata / Crydom `DC60D20` | ~950 CZK |
| **Exhaust Vents** | One-way flapper pressure vents (pair) | VW Group `1K0 819 909` | ~360 CZK |
| **Coolant Pump** | 12V brushless circulation pump | Bosch `0 392 020 024` | ~1,100 CZK |
| **Inverter Radiator** | $160 \times 160\text{ mm}$ aluminum core + fan | KTM / Quad 250cc aftermarket | ~850 CZK |
